PCI-E Express to SATA / eSATA / IDE Controller Adapter Card
Type : RAID Controller Card ( only for SATA Harddrives)
Bus: PCI Express x1
Support Ultra ATA 133 hard drive, and support Ultra ATA 100/66/33 standard.
Transmission rate 133MB / s, ATA133.
Support more than 137 GB capacity hard disk (48-bit LBA mode).
1 x IDE interface supports up to 2 IDE devices.
Supports one internal and one external SATA II interfaces with transfer rates up to 3Gb /s.
Support SATA 1.0 standard.
256 bytes FIFO port for quick read / write operation
Interface Card Type: RAID Card
External Interfaces : eSATA
SATA II (5Gbps) + PCI-Express RAID Controller Card
2-port RAID SATA2 5Gbps + One Port PATA PCI-Express x1 Card
Compliant with PCI-Express Specification v2.0 and backward compatible with PCI-Express 1.x
Compliant with Serial ATA Specification 3.0
Supports communication speeds of 6.0Gbps, 3.0Gbps and 1.5Gbps
Hot plug and Hot Swap
Supports Native Command Queuing (NCQ)
Supports Port Multiplier FIS based switching or command based switching
Supports ATA and ATAPI Commands
Support RAID Function: RAID 0, RAID 1 ( only for SATA Hard Drives)
1 x Controller Card PCI-E